1. Compared to the driving force, the sliding screw pair is 1/3

由于滚珠丝杠副的丝杠轴与丝杠螺母之间有很多滚珠在做滚动运动,所以能得到较高的运动效率。与过去的滑动丝杠副相比驱动力矩达到1/3以下,即达到同样运动结果所需的动力为使用滚动丝杠副的1/3。在省电方面很有帮助。

Due to the rolling motion of many balls between the screw shaft and the screw nut of the ball screw pair, high motion efficiency can be achieved. Compared with the past sliding screw pair, the driving torque reaches less than 1/3, which means that the power required to achieve the same motion result is 1/3 of that of using a rolling screw pair. It is very helpful in saving electricity.

2、高精度的保证

2. High precision assurance

滚珠丝杠副是一般是用世界水平的机械设备连贯生产出来的，特别是在研削、组装、检查各工序的工厂环境方面,对温度、湿度进行了严格的控制，由于完善的品质管理体制使精度得以充分保证。

Ball screw pairs are generally produced continuously using the world's highest level of mechanical equipment, especially in the factory environment of grinding, assembly, and inspection processes. Temperature and humidity are strictly controlled, and precision is fully guaranteed due to a sound quality management system.

3、微进给可能

3. Micro feed may

滚珠丝杠副由于是利用滚珠运动,所以启动力矩极小,不会出现滑动运动那样的爬行现象,能保证实现精确的微进给。

Due to the use of ball motion, the ball screw pair has minimal starting torque and does not experience crawling like sliding motion, ensuring accurate micro feed.

4、无侧隙、刚性高

4. No side clearance, high rigidity

滚珠丝杠副可以加与预压,由于预压力可使轴向间隙达到负值,进而得到较高的刚性(滚珠丝杠内通过给滚珠加予压力,在实际用于机械装置等时,由于滚珠的斥力可使丝母部的刚性增强)。

The ball screw pair can be pre pressed, as the pre pressure can cause the axial clearance to reach a negative value, thereby obtaining higher rigidity (by applying pressure to the ball in the ball screw, when used in mechanical devices, etc., the repulsive force of the ball can enhance the rigidity of the wire base).

5、高速进给可能

5. High speed feed may

滚珠丝杠由于运动效率高、发热小、所以可实现高速进给(运动)。

The ball screw can achieve high-speed feed (motion) due to its high motion efficiency and low heat generation.

本文的精彩内容由导轨丝杠提供知识提供，本网站还有很多的精彩内容，更多的内容您可以点击进入：http://www.jngongrun.com我们有专门的客服为您解答问题

The exciting content of this article is provided by the knowledge provided by the guide screw. There are also many exciting content on this website, and you can click to enter more content: http://www.jngongrun.com We have dedicated customer service to answer your questions