What are the characteristics of the products needed for the long-term development of linear guide? We want our products to have a permanent use point in the transmission machinery, so our products must have very advanced functions! Among all the mechanical transmission devices, gear transmission is the most widely used, which is used to transmit motion and power between any two shafts. The characteristics of gear transmission are: stable gear transmission, accurate transmission ratio, reliable operation, high efficiency, long service life, high power, fast speed and large size range. For example, the range of transmission energy is from very small to tens of thousands of kilowatts; the maximum speed is up to 300 m / S; the diameter of gear varies from several millimeters to more than 20 meters. But gear manufacturing requires special equipment, meshing transmission will produce noise. Compared with gear drive, chain drive has the following main features: low manufacturing and installation accuracy; when the center distance is large, the drive structure is simple. Instantaneous chain speed and instantaneous drive screw nut mechanism is also called screw drive mechanism. It is mainly used to convert rotary motion into linear motion or linear motion into rotary motion. It mainly transmits energy (such as screw press, Jack, etc.); it also has transfer movement, mainly including feed screw of machine tool workbench, etc.); it can also adjust the relative position of each part of screw drive mechanism.

　　因此，为了更好地利用直线导轨，那么清洁直线导轨是必然的结构;导轨、直轴作为设备的核心部件之一，其功能是起导向和支撑作用。为了保证机床具有较高的加工精度，要求导轨和直线具有较高的导轨精度和良好的运动稳定性。在设备运行过程中，被加工工件的加工过程中会产生大量的腐蚀性粉尘和烟尘。基于这些烟雾和灰尘沉积表面的导轨和直线轴大量很长一段时间,它有一个伟大的对设备的加工精度的影响,并将表面形成腐蚀斑点的直线轴导轨,缩短设备的使用寿命。为了使机床工作正常稳定，保证产品的加工质量，要认真做好导轨、直轴的日常保养。注意:导轨清洗时请准备好干棉布和润滑油。雕刻机的导轨分为直线导轨、滚柱导轨。清洁直线导轨:将激光头移动到右侧(或左侧),找到直线导轨,用干棉布擦拭直到光洁,加一点润滑油(可以使用缝纫机油,不使用石油),将激光头左右慢慢推几次,能均匀分布,这样油! !

　　Therefore, in order to make better use of the linear guide rail, it is necessary to clean the linear guide rail; as one of the core components of the equipment, the guide rail and the straight shaft play a guiding and supporting role. In order to ensure the high machining accuracy of the machine tool, it is required that the guide rail and the straight line have high precision and good motion stability. In the process of equipment operation, a large number of corrosive dust and dust will be produced during the processing of the processed workpiece. Based on these smoke and dust deposition surface of the guide rail and linear axis for a long time, it has a great impact on the machining accuracy of the equipment, and will form corrosion spots on the surface of the linear axis guide rail, shorten the service life of the equipment. In order to ensure the normal and stable operation of the machine tool and the processing quality of the products, the daily maintenance of the guide rail and the straight shaft should be done well. Note: please prepare dry cotton cloth and lubricating oil when cleaning the guide rail. The guide rail of engraving machine is divided into linear guide rail and roller guide rail. Clean the linear guide: first move the laser head to the right (or left), find the linear guide, wipe it with dry cotton cloth until it is smooth, add a little lubricating oil (sewing oil can be used instead of oil), slowly push the laser head left and right several times, and it can be evenly distributed, so the oil!

　　以上是导轨丝杠制造商为大家介绍的相关内容，想要了解更多内容，欢迎访问网站：http://www.jngongrun.com

　　These are the related contents introduced by the guide screw manufacturer. For more information, please visit the website: http://www.jgongrun.com