导轨丝杠使用时需注意以下要点：

　　Attention should be paid to the following points when using guide screw:

　　防止异物侵入：避免切屑、冷却液等异物进入，可能导致破损，使用时应配备伸缩护罩或防护罩

　　Prevent foreign objects from entering: Avoid foreign objects such as chips and coolant from entering, which may cause damage. When using, a retractable cover or protective cover should be equipped

　　正确安装：注意安装部品和安装精度，支撑部和螺母出现偏心或偏移将缩短使用寿命

　　Correct installation: Pay attention to the installation components and installation accuracy. Eccentricity or offset of the support parts and nuts will shorten the service life

　　配置导向部件：使用梯形丝杠时，应配置LM滚动导轨等导向部件，否则可能导致破损

　　Configure guiding components: When using a trapezoidal lead screw, LM rolling guide rails and other guiding components should be configured, otherwise it may cause damage

　　操作：避免掉落或敲击，可能导致划伤、破损，接触时应使用防护用具

　　Safe operation: Avoid falling or knocking, which may cause scratches or damage. Protective equipment should be used when in contact

　　清洁与润滑：清洁导轨丝杠表面油污，用油脂枪注油，确保油膜均匀

　　Cleaning and lubrication: Clean the oil stains on the surface of the guide screw, use a grease gun to inject oil, and ensure that the oil film is uniform

　　专用工具：安装时使用木制、橡胶或轻金属制品工具，避免使用易产生碎片的工具

　　Special tools: Use wooden, rubber, or light metal tools during installation to avoid using tools that are prone to producing fragments

　　遵循以上注意事项，可以确保导轨丝杠的正常运行和延长使用寿命。

　　Following the above precautions can ensure the normal operation and prolong the service life of the guide screw.

　　本文由导轨丝杠提供帮助，更多的相关内容请点击：http://www.jngongrun.com希望本文能够为您带来帮助，感谢您的阅读！

　　This article is assisted by the guide screw. For more related content, please click: http://www.jngongrun.com I hope this article can be helpful to you. Thank you for reading!