就直线光轴的精度来讲，它其实也就是会直接的就取决与轴的位置以及其用途。就这个方面来讲，我们其实也就是要传动轴颈上的同轴度，就这个方面来讲，直线光轴其实也就是会对传动的精度直接的就造成影响，就另外一个方面，它其实也就是会有噪声的出现。下面导轨丝杠厂家为您分析更多内容：

In terms of the accuracy of the linear optical axis, it actually depends directly on the position of the axis and its purpose. In this regard, we actually need to ensure the coaxiality of the transmission shaft neck. In this regard, the linear optical axis actually has a direct impact on the accuracy of the transmission. On the other hand, it actually causes noise. The manufacturer of the guide rail screw will analyze more content for you below:

就另外一个方面来讲，对于直线光轴的要求与生产的类型等一系列的方面来直接的就选择相应形式的一个毛胚形式。就另外一个方面来讲，它其实也就是会对直径的差距不是特别大，就另外一个方面来讲，我们其实也就是可以用棒料，如果他们的差距比较大的话，我们其实也就是可以直接的用锻件。

On the other hand, for a series of aspects such as the requirements for linear optical axes and the type of production, a corresponding form of hair embryo is directly selected. On the other hand, it actually means that the difference in diameter is not particularly large. On the other hand, we can actually use bar materials. If their difference is relatively large, we can actually use forgings directly.

再者，我们其实也就是要注意，就其把直线光轴直接的就装入到轴承座的时候，应该直接的就使用辅助工具，就另外一个方面来讲，我们其实也就是要注意避免其直接敲击它的端面或者是密封圈，应该直接的就使用轴承均匀进行导入，接着，其实也就是要用缓冲板，然后也就是要借助轻轻地敲击进行装入。

Furthermore, we actually need to pay attention to the use of auxiliary tools when directly installing the linear optical shaft into the bearing seat. On the other hand, we should also pay attention to avoiding it from directly hitting its end face or sealing ring. We should directly use the bearing to evenly guide in, and then, in fact, use a buffer plate, Then, it is necessary to use gentle tapping to load.

就其把直线光轴直接的就穿入直线轴承，就另外一个方面来讲，它其实也就是会把轴与轴承的线连成一直线。如果直线光轴能倾斜的进行插入，就其滚珠来讲的话，它其实也就是比较可能会出现脱落的现象，或者是造成其保持架出现变型的现象，以此也就是会对轴承造成一系列的损坏。

On the other hand, it actually connects the shaft and the centerline of the bearing into a straight line by directly threading the straight optical axis into the linear bearing. If the linear optical axis can be tilted for insertion, in terms of its ball bearings, it is actually more likely to fall off or cause deformation of its cage, which will cause a series of damage to the bearings.

们其实也就是要注意，就其外加载荷来讲的话，其实也就是应该平均分配在整个直线光轴上，就另外一个方面来讲，它其实也就是会直接的就承受了瞬间载荷的试试，应该直接的就可以使用两个或者是更多的直线光轴轴承。就其轴承如果是不承受旋转载荷，不然也就会导致一系列的意外事故。更多事项就来我们网站http://www.jngongrun.com咨询吧！

In fact, we should pay attention that when it comes to the external load, it should be evenly distributed across the entire linear optical axis. On the other hand, it is actually a test that can directly withstand instantaneous loads. It should be possible to use two or more linear optical axis bearings directly. If the bearing does not withstand rotating loads, it will also lead to a series of accidents. For more information, come to our website http://www.jngongrun.com Consult!